Extreme performance ‘Bagger’ swingarm
Dayton, Ohio based Brock’s Performance is offering new, hand-crafted performance aluminum extended (0 – 3” over) Bagger swingarms. Described as 100 percent bolt-on designs, they can be used with the OEM rear wheel, caliper, spacers and associated components.
![]()
Engineered for use in high-power, high-torque applications, the optional 28mm DOM (Drawn Over Mandrel) hollow steel axle is proven to 350 ft-lbs; the 3-position shock mounts (+1” forward, standard, -1 rearward) allow flexibility in ride height and billet axle adjusters/ends + grade 8 steel adjuster bolts prevent axle slide.
![]()
They have replaceable Aurora PTFE lined spherical bearings pre-installed, shed up to 50% of unsprung weight vs. the OEM swingarm, and are available in a natural brushed aluminum finish.
Brock’s say that “our 6061-T6 heat-treated aluminum extrusion means dependable strength, and we know we are offering unequaled craftsmanship, engineering and weld quality.”
BROCK’S PERFORMANCE PRODUCTS
www.brocksperformance.com
Dayton, Ohio based Brock’s Performance is offering new, hand-crafted performance aluminum extended (0 – 3” over) Bagger swingarms. Described as 100 percent bolt-on designs, they can be used with the OEM rear wheel, caliper, spacers and associated components.
Engineered for use in high-power, high-torque applications, the optional 28mm DOM (Drawn Over Mandrel) hollow steel axle is proven to 350 ft-lbs; the 3-position shock mounts (+1” forward, standard, -1 rearward) allow flexibility in ride height and billet axle adjusters/ends + grade 8 steel adjuster bolts prevent axle slide.
They have replaceable Aurora PTFE lined spherical bearings pre-installed, shed up to 50% of unsprung weight vs. the OEM swingarm, and are available in a natural brushed aluminum finish.
Brock’s say that “our 6061-T6 heat-treated aluminum extrusion means dependable strength, and we know we are offering unequaled craftsmanship, engineering and weld quality.”
BROCK’S PERFORMANCE PRODUCTS
www.brocksperformance.com